|
Please
go to the corresponding number from the
order form
for guidance...
1. Print your name and address
you want the new System sent to. Reference refers
to who is going to wear this system ?
2. Write a daytime phone number
you can be reached at including area code.
3. Men's and women's Systems
are generally (but not always) made differently.
Men usually use a tape tab on the front, women usually
don't. Women are usually able to utilize what hair
they have by integrating it up through holes in
the System.
4. Our Synthetic hair is made
of Kanekalon and Toupelon. Our 100%
Human Hair Wig is
made of the finest
Indian hair available.
You can request 100% of one or the other or a mixture
of both. Grey hair is always synthetic.
5.
The easiest thing to do is send us an old
system that fits properly. We will use the same
base measurement and return it with your new System.
If that is not an option then do either a
Measurement or Tape Template
below:
Measurement
For men: A) Place three to four
fingers above the eyebrows and locate
with a pen dot the beginning of the
natural hairline.
B) Measure from that point backwards
to the beginning of the present hairline.
For extended wear users measure
1/4 - 1/2 inch further back into the
present hairline so system will be large
enough to attach to your own hair.
C) Measure from the beginning hairline
(side to side) across top of the head.
For extended wear users measure
1/4 - 1/2 inch further down each side
of the present hairline so system will
be large enough to attach to your own
hair.
For women: Side measurement is done
like men's above. However, front to
back is different. Because women typically
thin in front but don't recede like
men do, it is wise to use the natural
bang and add hair behind it. (Some men
may choose to do this technique also).
Start your measurement about 1 inch
behind natural front hairline, going
over the top to back as far as it needs
to cover the thin area. |
To Make a Tape Template
Printable
Simple Instructions
(1). Stretch Saran plastic wrap
over persons head. Twist at sides and
have the person hold down firmly.
(2). Run clear see through Packing tape
strips from front to back and from side
to side - overlapping to form a solid
cap. Four layers are usually enough.
(3). Draw (using a permanent marker)
the exact outline of the hairpiece size
you want, front recession lines, part
placement (if any), hair direction,
exactly as you want them on the finished
hairpiece. (Use guidelines in
Measurements above
to help with determining size)
(4). Remove template from persons head
and cut off excess tape around edges.
Call us if you have any questions
regarding making a template or you may
want to see our
instructional video.
|
6.
Left, right, center partings are for definite parts.
If you wish to part on either side or use no part
choose Multi-directional.
7.
Take sample from crown or back.
Scotch tape around end of sample. Please write down
what part of the head your sample is coming from.
If your sides are more Grey, clip a sample. Be sure
to identify this for sides only. Grey hair is offered
in synthetic or Yak.
8.
Curl size in millimeters is determined by professional
perm rod used. See diagram below.
9.
Extra Light density is 60% thickness of an average
head of hair.
Light density is 80% thickness of
an average head of hair.
Light to Medium Density is considered
90% thickness of an average head of hair .
Medium Density is considered 100%
thickness of an average head of hair (This is thick).
Medium to Heavy Density is considered
120% thickness of an average head of hair (This
is very thick).
Heavy Density is 150% thickness
of an average head of hair (This is very very thick).
10.
If you want anything different than System
Special features, list them here. System features
(unless otherwise requested) include:
* European style
Human Hair wig or
hairpiece. Grey is synthetic.
* Base material on men's System is M-Mesh with 3/4
inch Polyurethane see through tab perimeter. Front
tab is 3/4 inch glass silk with scallop front edge.
Lace
front hairpiece may be requested. To
learn more about
scallop front hairpiece
and
lace front wig
click here.
* Base material on Women's Integration System is
1/2 inch Braided Monofilament (fish type net) and
1/4 inch M-Mesh Ribbon around perimeter for weave
attachment. Can also be used with clips
* Average length on
all Systems are 4-6 inches. If you want longer length
than 8 inches, please add $40.00 for every 2 inches.
Example: 10 inches long is $40.00 more. 12 inches
is $80.00 more and so on.
Matching tape tab
#('s)
| If you would like tape tabs with
this order, specify by letter(s) which
kind of tape you prefer. Each letter
you choose comes with 5 bags of tape
for only $15.00 with hair purchase only.
Enter letters and total on order form. |
Frontal tape tab
A. Brown liner-Opaque
B. Red Tack-Transparent
C. White liner-Transparent |
Rolls-for
daily or extended wear 3/4" x 108"
D. Brown liner-Opaque
E. Red Tack-Transparent
F. White liner-Transparent |
We also have Lace Tape
in frontal or Straight
NOTE: Women's
systems don't generally use tape tabs on integration
units.
The following
is a detailed description of the two most popular
system fronts on the market today.
Scallop Front - This is
a thin clear skin like Polyurethane material
designed to be slightly wavy along the hairline
giving a realistic appearance. This type
of front lasts the longest. Density (thickness)
can be whatever you choose. Scallop front
is attached using a tape tab. Underventing
(hair coming from the underneath side side
of unit) cannot be done with a scallop or
lace fronts. It would show too heavy of
a solid line. Underventing is done on the
front hairlines that go in a straight line,
but this is an older method for fronts.
Lace Front - This is the
newest rage in modern hair replacements.
A very thin French Lace or Welded Mono Lace
is placed on the front of the unit from
temple to temple and back about 2"-3" or
so. The lace is invisible to the eye and
hair appears to be growing from the scalp,
even with up close scrutiny. Density in
lace works best choosing 'light to medium',
at least in that area only. The back of
the system is made the same way as before,
with tape tab perimeter.The lace front is
attached with a special lace tape or SoftLoc
(see
price page) adhesive is applied to the
skin in lace area only. Then the system
lays down on top of adhesive, no tape is
required in front. This
lace front wig
is designed to be replaceable because it
is very fragile. The client must treat it
very gently. Even still, most people can
only go up to about 6 months before needing
a repair. It really is not as expensive
as you might think to maintain. It is recommended
to purchase two systems at a time. When
one unit needs a new lace front put on,
send it to us. We place a 4-5 week priority
rush on it. The unit comes back cleaned,
totally revented (more hair put in all over),
with a whole new Lace front. It looks like
a brand new system. For the best system
on the market and the most real looking,
you can't beat the
repair price. $150.00 And you can replace
the front as many times as you want until
the rest of the system is totally worn out!
|
